Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

地下工程非爆破开挖机械破碎法机理及应用

针对非爆破法开挖工序中的关键问题——导向孔布置方案优化,结合非爆破施工实作流程及工艺,利用波动理论探索了破碎锤冲击破岩机理。破碎锤通过钎杆冲击导向孔产生孔间贯穿裂缝进而破岩掘进,破碎锤冲击破岩的过程是岩石被拉坏的过程,孔间岩石中的切向应力是提高破岩效率的关键因素。基于岩石断裂力学理论,总结得出导向孔间裂缝产生、扩展、贯通的判据,并依托实际工程进行验算,理论计算结果与现场试验结果吻合良好,同时提出了导向孔布置优化方案的改进建议。     

水下声源引起的水表面横向微波的理论研究

利用水下声信号在水表面引起的水表面横向微波振幅很小的条件,将普遍的流体力学方程线性化,推导出在水下点声源的激励下,水表面产生的二维横向微波色散关系以及波的传播形式。结果表明,二维水表面的横向微波具有和一维情况类似的结果,即具有波长短、传播速度小的特点,因而可以对入射到表面的激光束进行调制,为水下声信号检测奠定了理论基础。     

自行火炮液压系统油液内泄漏量数学模型研究

通过对自行火炮油液泄漏故障形式和原因分析,综合考虑系统的工作压力、温度和混入空气量影响,建立了自行火炮油液泄漏量的数学模型。该模型指出了自行火炮液压系统内泄漏量主要取决于系统的温度、压力、液压油的动力粘度、油液的体积模量和热膨胀系数,揭示了泄漏量随工作参数峰值变化的规律,可为自行火炮的油液泄漏检测与定位提供参考。     

浅谈加强干部队伍机制建设

干部队伍建设是部队建设的根本。要抓好这项根本性的工作,就要建立行之有效的干部队伍机制建设,同时,要突出重点,落实措施,确保干部队伍机制建设落到实处。     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

垂直刚性面边界条件下水下爆炸气泡运动的理论研究

为研究垂直边界面对水下爆炸气泡脉动的影响,根据势流理论建立了垂直边界面条件下水下爆炸气泡运动的理论模型,编制计算程序进行求解。对水下爆炸气泡脉动运动的特点、流场的速度及压力的分布、气泡引起的载荷形式进行了分析,结果表明,此模型能够反映水下爆炸气泡和周围流体介质的运动规律,并能进行定量的计算。     

舰船静置爆炸气泡时总纵强度计算方法研究

新型"大气泡能"概念武器在水下爆炸能产生大气泡,对船体总纵强度造成很大影响,有可能使舰体发生纵向折断或倾覆。为研究这种作用,建立了舰船静置爆炸气泡时总纵弯曲强度的理论计算方法。采用静置爆炸气泡的假设,将气泡产生的浮力损失和压力差转化为等效载荷,计算气泡作用后船体的总纵弯矩和剪力并进行强度校核。以某舰艇为例进行计算,结果表明,爆炸气泡作用下船体的剪力和弯矩比静浮状态增大很多,船体发生纵向折断破坏的危险性也随之增大。     

分布参数管道的一种改进的小分段数有限元模型

在分段数为１和２时，现有有限元模型的一阶谐振频率比一维分布参数模型的一阶谐振频率低许多，因而其适用的频率范围较低，计算精度较差。本文提出了一种改进的小分段数有限元模型，通过修正流体管道的并联导纳使分段数为１和２时的有限元模型的一阶谐振频率与一维分布参数模型一致，从而提高了其使用的频率范围和计算精度。利用单根管道阀门关闭的水击问题的仿真计算对改进模型的效果进行了验证。在分段数为２时，原有的有限元模型的计算结果与分布参数模型的计算结果相差较大，而改进后的模型的计算结果与分布参数模型的计算结果基本一致。     

复合材料的弹性常数与损伤的直接测试

本文将复合材料细观力学和复合材料微裂纹损伤理论与直接测试方法结合起来,在一次加载条件下直接测得复合材料结构件的弹性常数和损伤变量随外载的变化规律,从而可避免直接测试方法的多次加载的困难。由碳纤维／环氧复合材料圆筒壳的轴压实验的直接测试所得结果比较合理,表明该方法是合理可靠的,特别是在加载条件下直接测得复合材料结构件的损伤发展规律之后,可将复合材料微裂纹损伤理论直接用于工程结构件的动态损伤监测。